thewetbeaversmileswhentickled.com

Asterisk@home

Posted 2 years, 11 months ago on May 1, 2006 by yerma Projects

The Asterisk@home project is brilliant - I have got a full PBX system working at home now with about 2 hours work. It features conferencing/call waiting/wake up calls/Flash Operator panel/use of gizmo project/ring groups and so much more. I found the info available here was brilliant with regards to setting up the incoming and outgoing stuff for gizmo and which ports etc are required to be opened :) One thing it doesn't mention is that you need to set internal routes for default ring groups etc.

Setup the SIP trunk as described
Add an internal route for all did and cid which rings the extension/ring group you require.
Copy the default 9|* outbound into one called 8_outbound or similar and then select the trunk to use.
relax and rest on your laurels :)

Next step is to move it close to the router so I don't have a cable dangling round the house and then either get a cheap ip phone or a convertor box.

The trackback URL for this post is http://www.thewetbeaversmileswhentickled.com/bblog/trackback.php/96/

Comments

No comments, be the first!

Add Comment	( to reply to a comment, click the reply link next to the comment )
Your Name		Remember Me!
Email Address		Make public
Website		Make public
Comment Title
Comment
Submit Comment